Posted on

Winter UTV & ATV Battery Guide: Test, Choose & Replace Before the Cold Hits

bs battery btx20hl agm utv battery

Nothing kills a cold-morning plan faster than turning the key on your UTV or ATV and hearing a weak click. Cold temperatures slow down the chemistry inside a battery, while heaters, LED light bars, winches and plows ask more from it than ever.

The good news is that a few minutes of checking and the right replacement battery can keep you from getting stranded. Here’s how to tell whether your battery is ready for winter, how to choose between conventional, AGM and lithium options, and which BS Battery products we carry at Offroad Armor to help.

Why Winter Is Hard on Powersports Batteries

A battery that seemed fine all summer can suddenly struggle once temperatures drop. Cold weather reduces the power a battery can deliver at the same time your engine needs more effort to crank. Add in short trips that never fully recharge the battery, accessories pulling power at idle, and machines that sit parked for weeks between hunts, and it’s easy to see why so many “dead machine” calls happen in November and December.

Step One: Test Your Battery Before the Cold Sets In

Guessing is the most expensive way to deal with a battery. The BS BATTERY BST 1000 12V Battery Tester (part number 700605) takes the guesswork out. It runs a complete diagnostic program that checks battery condition, voltage, internal resistance, cranking performance, charging performance and alternator operation. It also measures cold cranking amps (CCA), which tells you how well the battery is really performing under starting conditions.

The BST 1000 works with 12-volt lead-acid and lithium batteries, including flooded, AGM flat plate, AGM spiral, GEL, EFB and lithium types. It has built-in short-circuit and reverse-polarity protection, and it comes with a clamps set, a protective pouch and a USB cable so you can connect it to a computer and print full diagnostic results.

Option One: Conventional Maintenance-Free Batteries With Acid Pack

If your machine calls for a standard YTX-style battery, BS Battery’s acid-pack batteries are a dependable, budget-friendly replacement. The BS Battery BTX14-BS (part number 300604) is made for machines that specify a BTX14-BS, YTX14-BS or equivalent battery, and the BS Battery BTX20HL-BS (part number 300614) covers equipment that uses a compatible BTX20HL-style battery.

Both batteries include the acid pack for initial filling and are completely sealed after activation, so they’re maintenance-free from then on. According to BS Battery, they’re suitable for cold-weather use, help reduce plate sulfation during service and storage, and provide a longer voltage hold. One important note: these batteries are designed for upright installation only, so follow the activation, charging and safety instructions included with the battery.

Option Two: Factory-Sealed AGM for Plug-and-Play Installs

If you’d rather skip filling a battery with acid, an AGM battery is a great choice. The BS Battery BTX20HL AGM Battery (part number 300689) is ready to use right out of the box. It uses Absorbed Glass Material construction and has a spillproof, totally sealed design, so there’s no acid handling during installation.

A big advantage for UTV owners is mounting flexibility. This AGM battery supports multi-position mounting at angles up to 90 degrees, which helps in tight battery compartments. It also has a low discharge rate, which is handy for a hunting rig or plow machine that sits for stretches between uses. It’s intended for equipment that uses the BTX20HL or YTX20HL battery designation.

Option Three: Lightweight Lithium Power

For riders who want the latest technology, the BS BATTERY BSLi-12 Max 12V Lithium Battery (part number 360117) is a plug-and-play upgrade with a 12.8-volt, 3 Ah lithium configuration. BS Battery says it weighs up to 70% less than comparable lead-acid batteries and delivers impressive cold-cranking performance.

Other features include an integrated state-of-charge indicator for quick status checks, multi-position mounting, fast-charging capability, very low self-discharge and a rated cycle life of more than 2,000 cycles. It contains no acid, so there’s no leakage risk, and it uses brass terminals with silicone sealing. It’s designed for compatible 12-volt powersports equipment, so check your machine’s battery specifications, terminal layout and physical fit before you order.

How to Pick the Right Battery for Your Machine

  • Start with your current battery’s designation. Look at the label on your existing battery or your owner’s manual for the battery size, such as YTX14 or YTX20HL.
  • Check terminal layout and polarity. Two batteries of the same size can have the terminals on opposite sides, and cables only reach so far.
  • Consider mounting position. If your battery sits on its side or at an angle, choose an AGM or lithium battery that supports multi-position mounting instead of an upright-only battery.
  • Think about how you use the machine. Machines that sit between hunts or snowfalls benefit from batteries with low self-discharge, and a quick test with a battery tester before each season helps catch problems early.

Each of these listings notes that fitment should be confirmed against your original battery and your machine manufacturer’s requirements. If you’re not sure which battery your machine needs, contact us before you buy and we’ll help you sort it out.

Winter Battery Tips to Keep You Running

Once your new battery is installed, a few habits go a long way. Keep the terminals clean and tight, since corrosion and loose connections can mimic a weak battery. If your machine will sit for a while, keep the battery charged with a charger made for your battery type.

Shop Powersports Batteries at Offroad Armor

Don’t wait for a cold morning click to find out your battery is done. Test it now, replace it if it’s tired, and head into winter knowing your machine will fire up when you need it. Browse BS Battery replacement batteries, lithium upgrades and the BST 1000 tester, along with heaters, enclosures, plows and more winter gear, at offroadarmor.com.

Posted on

UTV & ATV Cargo Boxes for Hunting Season & Winter Gear: Mule, RZR, Sportsman, Pioneer & Defender

highlands rzr utv rear cargo

Late fall is when a side-by-side carries the most stuff. Hunting season means calls, gloves, a spare jacket and a thermos. Cold-weather chores mean tools, straps and a tow rope. Toss all that loose in the bed and it ends up wet, muddy, bounced out on a rough lane or sitting in plain sight at the trailhead. A sealed, lockable cargo box fixes that. Here’s what to look for, plus five boxes we carry for Kawasaki Mule, Polaris RZR, Polaris Sportsman, Honda Pioneer and Can-Am Defender.

Why a Cargo Box Earns Its Keep in Fall and Winter

An open bed is great for hauling firewood or feed, but it does a poor job protecting gear. Rain, slush and road spray soak anything soft, and a bag of tools can slide around and rattle all day. A weather-sealed box keeps clothing and electronics dry, keeps dust and mud out, and keeps small items from getting lost. A box with lockable latches also gives you some peace of mind when you park at a hunting spot or leave the machine outside a camp overnight.

Insulated boxes pull double duty. They keep drinks and lunch cold in early season, and they can help keep food from freezing solid on a bitter day in the stand.

What to Look For in a UTV or ATV Cargo Box

  • Weather sealing: Look for gasketed lids or listings that call the box waterproof, water tight or weatherproof, so your gear stays dry in rain and slush.
  • Security: Lockable latches make it harder for someone to grab your gear when you walk away from the machine.
  • Insulated or not: Insulated boxes keep things cold (or keep them from freezing), while non-insulated boxes usually give you more space for bulky items.
  • Mounting: Quick-release systems let you pull the box off in minutes when you need the full bed for work.
  • Exact fitment: Most of these boxes are built for specific makes and model years, so match your machine before you order.

HIGHLANDS CARGO Insulated Rear Cargo Box for Kawasaki Mule

The HIGHLANDS CARGO UTV Insulated Rear Cargo Box for 2015-2025 Kawasaki Mule Models is built for the Mule Pro-FXT and Pro-DXT. The manufacturer says it can retain ice for up to five days, and it uses weatherproof seals and lockable latches to keep gear dry, dust-free and secure. It’s molded from impact-resistant low-density polyethylene, weighs 40 lbs, and installs or comes off in minutes. You can run one or two boxes on a Mule and mix the insulated box with Highlands’ larger non-insulated model, so one side can hold cold food and drinks while the other holds bulky gear.

HIGHLANDS Custom Rear Cargo Box for Polaris RZR 900/1000

Sport riders need storage too, especially when the RZR doubles as a hunting or trail-scouting machine. The HIGHLANDS Custom Rear UTV Cargo Box for 2015-2026 Polaris RZR 900/1000 Trail & S offers 37 gallons (148 quarts, 140 liters) of capacity, which Highlands says is large enough for helmets, clothing, tools and more. It weighs 25 lbs, is shaped to fit the lines of the RZR, and uses weatherproof seals and lockable latches. A quick-release system lets you install and remove it in minutes with no tools.

HIGHLANDS Sportsman 850/1000 Day Box for ATVs

ATV riders get a compact option with the HIGHLANDS ATV Rear Cargo Box – Sportsman 850/1000 Day Box. It’s listed for 2015-2024 Sportsman 850 Touring and Sportsman XP 1000 Touring models. The box is water tight and dust proof, weighs just 8 lbs, and is injection-molded from impact-resistant low-density polyethylene. A quick-release locking system makes it simple to put on and take off, and the internal mounting system uses lockable latches for added security. It’s a good size for a day of scouting, checking trail cameras or running fence.

SuperATV Cooler/Cargo Box for Honda Pioneer 1000

For Pioneer owners, the Honda Pioneer 1000 Cooler/Cargo Box from SuperATV is described as tough, insulated and tightly sealed. That makes it a flexible pick: use it as a cooler for lunch and drinks on a long day in the field, or as a sealed box that keeps gloves, a spare layer and tools dry. Check the product page for the exact Pioneer models it fits before you order.

Rough Country Under Seat Storage Box for Can-Am Defender

Not every storage upgrade has to go in the bed. The Rough Country Under Seat Storage Box for Can-Am Defender HD5, HD8, HD9 and HD10 (2018-2026) fits beneath the passenger seat on two-seat Defenders or beneath the rear seats on four-door models. It holds 3.7 gallons (14 liters), is made from injection-molded polypropylene, and has a water-resistant latching lid that helps keep out dust, mud and moisture. An integrated carry handle lets you pull it out and take it to the garage or camp. Rough Country says it’s a true drop-in design that most people can install at home in about 10 to 15 minutes, and it’s backed by a limited lifetime replacement warranty against manufacturer defects (Rough Country part number 97061). It’s a smart spot for recovery straps, a first-aid kit or a tire repair kit.

Cargo Box Tips for Cold-Weather Riding

  • Pack by priority: Keep gloves, a headlamp and a dry layer on top, where you can grab them fast.
  • Check seals and latches: Wipe mud and grit off the gasket and latches after wet rides so the lid keeps sealing and locking properly.
  • Watch mounting hardware: After the first few rides on rough ground, make sure the box is still secure and the quick-release is fully engaged.

Shop UTV and ATV Cargo Boxes at Offroad Armor

Stop letting your gear ride loose in the bed this season. Browse cargo boxes, cooler boxes and under-seat storage for your machine at offroadarmor.com. If you’re not sure which box fits your year and model, contact our team before you order and we’ll help you get the right one.

Posted on

UTV Fender Flares for Fall & Winter Mud: Defender, General, Commander & Ridge

can am defender fender flares mud

Fall rains, thawing ground and the first wet snow turn every trail, field road and food-plot lane into a mud bath. Your tires pick that mess up and throw it straight at the cab, your passengers and your gear. Stock fenders on most side-by-sides stop short of the tread, so a lot of that spray goes right past them. A good set of fender flares closes the gap. Here’s how flares help in fall and winter, what to look for, and five sets we carry for Can-Am, Polaris and Kawasaki machines.

Why Fender Flares Matter More in Fall and Winter

Summer dust brushes off. Cold-season mud is different: it’s heavy, wet and often mixed with slush, road salt or manure, and it sticks to everything. Without enough fender coverage, it coats your door panels, seats and floor and ends up on your coat and boots. It also gets packed onto the body panels, where grit can scuff the finish over time.

Fender flares extend the coverage past your stock fenders so more of what the tires throw gets knocked down before it reaches you. If you’ve added wider tires or an aftermarket wheel with more offset, flares matter even more, because the tread now sits farther outside the factory fenders.

What to Look For in a Set of UTV Fender Flares

  • Extra coverage: Check how much extension the set adds. The flares below add up to 3 to 4.5 inches in key spots, depending on the set.
  • Material: Most quality flares are made from 1/8-inch (.125″) polyethylene. It flexes when it catches a branch or rut instead of cracking, which matters when plastic gets stiff in the cold.
  • Hardware: Look for kits that include all mounting hardware, ideally with coated or aluminum pieces that won’t rust after a winter of wet riding.
  • Exact fitment: Flares are model-specific. Match your make, model, year and trim, and watch for notes about XP versus non-XP models or OEM accessories that conflict.

Can-Am Defender HD10 Low Profile Fender Flares

For Defender owners who work in the mud, the Can-Am Defender HD10 Low Profile Fender Flares from SuperATV add up to 4.5 inches of extra coverage to help block mud, water and flying debris. They’re made from 1/8-inch plastic and mount with machined aluminum washers and countersunk hardware, and they follow the contours of the stock flares for a clean fit. The textured black finish gives the Defender a more aggressive look without sticking way out. We also list low-profile sets for the Defender HD7, HD8 and HD9, so search our store for your model.

Polaris General Fender Flares with Mud Guards (Non-XP)

If you run a non-XP General, the Polaris General Fender Flares with Mud Guards are a smart cold-season pick. This complete set of four (two front, two rear) is made of black .125″ HMW haircell polyethylene, CNC-cut so the edges are smooth, with a custom bend design for rigidity. It also includes mud guards for the battery and fuel tank, which is a nice touch when you’re slogging through wet fields. All hardware has a black-coated finish to resist rust.

Fitment matters here: it fits 2016+ General 2-seat and 2017+ General 4-seat models, non-XP only. It does not fit 2021+ General XP/XP-4 models, and it doesn’t work with the Polaris OEM oversize flares (accessory #2884220).

Polaris General XP Fender Flares (Full Set)

Own a General XP? Go with the Polaris General XP Fender Flares (Full Set), made for 2020-current General XP models. They provide up to 3 inches of extension in key locations and are built from .125″ HMW haircell polyethylene. They’re engineered to fit the General XP precisely and install with basic tools, so you can bolt them on in the driveway before the next wet weekend.

Can-Am Commander Fender Flares (Set of 6)

The Can-Am Commander Fender Flares fit 2021+ Commander and Commander Max models and add as much as 3 inches more protection compared to stock. The kit is a complete set of six pieces (two front and four rear) made of flexible black HMW haircell polyethylene, CNC-cut with smooth edges and a custom bend for rigidity. All mounting hardware is included.

Kawasaki Ridge Fender Flares (Full Set)

Kawasaki’s Ridge is a great all-weather machine, and the Kawasaki Ridge Fender Flares (Full Set) help keep it that way. They fit the 2024+ Ridge and 2025+ Ridge Crew, add up to 3 inches of extension in key spots, and are made of .125″ HMW haircell polyethylene. They help reduce spray and splash to keep passengers cleaner and protect the paint and bodywork, and they install with basic tools.

Install and Care Tips for Winter Riding

  • Install on a warm day or in the shop. Polyethylene is easier to position when it isn’t cold-stiff. Lay out all the pieces and hardware first and follow the manufacturer instructions.
  • Check tire clearance. Turn the wheel lock to lock and cycle the suspension if you can, especially with larger tires.
  • Rinse often. Packed mud and salt are heavy and hold moisture against hardware. A quick rinse after wet rides keeps everything tight and clean.
  • Re-check hardware. After the first few rides, and again mid-season, make sure every fastener is still snug.

Pair Flares With Other Cold-Weather Upgrades

Flares handle what the tires throw from the side. For a cleaner, warmer cab all winter, pair them with doors, a windshield and a cab back to block wind and spray, and floor liners to catch what gets in anyway. Together, those upgrades make a big difference on cold, muddy days.

Shop UTV Fender Flares at Offroad Armor

Don’t spend another wet season wiping mud off your seats and jacket. Browse fender flares for your machine at offroadarmor.com, and if you’re not sure which set fits your year and trim, contact our team before you order. We’re happy to help you get it right the first time.

Posted on

UTV Floor Liners for Winter: Keep Mud, Slush & Salt Out of the Cab

RAVEK Floor Liner for Can-Am Defender - UTV floor liner for winter mud and slush

Winter mud, snowmelt, and road salt will trash a UTV cab floor faster than almost anything else. Once that mess works into the carpet or plastic, it holds moisture, smells, and grit all season. The fix is simple: put a molded UTV floor liner down before the first thaw, so mud and slush stay on the mat instead of in your cab.

Here is how floor liners help through winter, what to look for, and five in-stock options for Can-Am Defender, CFMOTO UForce U10 PRO, and Polaris Xpedition machines.

Why Floor Liners Matter Once Temperatures Drop

Fall and winter riding loads the cab with wet boots, frozen mud that thaws mid-ride, and salt from plowed roads and driveways. A fitted liner with raised edges catches that mess so you can pull it out and rinse it instead of scrubbing the factory floor. Look for a custom-molded or laser-measured fit, a slip-resistant surface, and a material that sheds water rather than soaking it up. Pair liners with doors, a windshield, and a heater if you already sealed the cab — clean floors make that enclosed space a lot nicer to live in.

RAVEK Floor Liner for Can-Am Defender

The RAVEK Floor Liner for Can-Am Defender (part number 65-1012) is a rugged, flexible rubber liner built for Defender models. RAVEK’s custom-molded design helps lock in dirt, mud, and debris while repelling moisture from the vehicle floor. An engineered shock-dampening layout is meant to cut down on cab vibrations on trails, work sites, and uneven ground, and the slip-resistant surface adds stability when boots are wet. The liner is made from 100% recyclable materials. It is a solid all-around pick if you want one molded rubber piece that handles muddy winter chores on a Defender.

Rough Country Front Floor Mats for Defender HD5–HD10

Prefer laser-measured polyethylene mats with raised edges? The Rough Country Floor Mats for Can-Am Defender HD5, HD7, HD8, HD9 and HD10 (2018–2026) are cut for a vehicle-specific fit that follows the Defender’s floor contours. Durable yet flexible polyethylene construction is built for work and trail use. Raised edges help capture mud, water, dirt, and debris, and the textured surface adds grip underfoot for entry and exit. When they get dirty, pull them out, rinse, and drop them back in. Fitment year on the listing is 2018–2026 for those HD5 through HD10 trims — confirm your exact model on the product page before you order.

Rough Country Rear Floor Mats for Defender Crew Cabs

Running a crew Defender with rear passengers tracking in more slush? Add the Rough Country Rear Floor Mats for Can-Am Defender HD5–HD10 (2018–2026). This rear set uses the same laser-measured polyethylene approach as the front mats: raised edges to contain messes, a textured traction surface, and a rinse-and-reinstall cleanup. It is listed for select Defender HD5, HD7, HD8, HD9, and HD10 models from 2018 through 2026. Front and rear together give you full-cab coverage for muddy winter workdays.

Smartliner Front-Row Liners for CFMOTO UForce U10 PRO

UForce U10 PRO owners can grab the Smartliner CFMOTO UForce U10 PRO Front-Row Floor Liners. These custom-fit liners are precision-molded for the U10 PRO’s front-row floor with a black finish aimed at an OEM-quality look. Full-floor coverage helps keep dirt and moisture off the factory flooring. Waterproof, stain-resistant material handles muddy workdays and wet trails, and the textured non-slip surface helps hold the liners in place while giving boots better footing. Smartliner notes a durable, BPA-free build without harsh chemical odors, hose-off cleanup, and a lifetime warranty on the tough construction. Match the listing to your U10 PRO before checkout.

RAVEK Floor Liner for Polaris Xpedition

For Polaris Xpedition cabs, the RAVEK Floor Liner for Polaris Xpedition (part number 64-2002) brings the same rubber approach over to that platform. It is designed specifically for the Xpedition as a flexible barrier against dirt, moisture, and trail debris. Shock-dampening rubber helps minimize cab vibration, the slip-resistant surface aids stability, and the custom-molded shape is built to lock in dirt and repel moisture. Like the Defender RAVEK liner, it uses 100% recyclable materials. Verify your exact Xpedition model and configuration on the product page so the liner lines up with your cab.

How to Pick and Install Winter Floor Liners

  • Match make, model, and year. Defender HD5–HD10 2018–2026 mats are not a universal fit, and Xpedition or U10 PRO liners are platform-specific.
  • Front vs. rear. Two-seat machines may only need a front liner. Crew Defenders benefit from pairing Rough Country front and rear mats so rear passengers are covered too.
  • Rubber vs. polyethylene vs. TPE. RAVEK uses flexible rubber with shock dampening. Rough Country uses tough polyethylene with raised edges. Smartliner uses waterproof TPE-style material with retention-minded fit — pick the feel and cleanup style you want.
  • Install dry, then ride. Sweep out the factory floor, drop the liner in so edges seat against the contours, and check pedal and heel clearance before your first cold-weather run.
  • Rinse after salty miles. Pull the liner, hose off mud and salt, and let it dry so the cab stays cleaner between plow days and trail rides.

Keep the Cab Clean All Winter

A good set of UTV floor liners is cheap insurance against a season of mud, slush, and salt grinding into the cab. Whether you go RAVEK rubber on a Defender or Xpedition, Rough Country front and rear mats on an HD5–HD10, or Smartliner front-row liners on a UForce U10 PRO, you will spend less time scrubbing and more time riding. Shop these liners and the rest of your winter cab gear at offroadarmor.com, and get the floor covered before the next thaw.

Posted on

UTV Winter Cab Bundles: Hard Enclosure + Heater Kits for Defender, Ranger & More

Pioneer 700 Winter Cab Bundle: Full Hard Cab - Offroad Armor

When the first hard freeze hits, a windshield alone will not cut it. You want a sealed cab that keeps wind and snow out, plus a heater with defrost so you can actually see where you are going. Buying those pieces separately works, but Offroad Armor’s Winter Cab Bundles package a full hard cab enclosure with a matching Inferno cab heater kit so you can get winter-ready in one order.

Here is how these bundles work, who they fit, and what to check before you click buy.

What You Get in a Winter Cab Bundle

Every Winter Cab Bundle pairs two matched pieces for the same machine:

  • A full hard cab enclosure — typically doors, windshield, roof, and rear panel from Hard Cabs (or the machine-specific hard enclosure listing for that model).
  • An Inferno cab heater kit with defrost — a direct-fit heater sized for that UTV so warm air and defrost vents go where you need them.

The point is simple: seal the cab, then heat it. The enclosure ships by freight on its own, and the heater may ship separately, so plan a little lead time for both pieces to arrive before you schedule install day.

Each listing also shows a bundle savings versus buying the enclosure and heater apart. On the Defender Premium heater bundle that savings is listed at $289.31; most of the Inferno-kit bundles list around $250 in savings, and the Mule PRO-FXT bundle lists $339.43. Exact numbers are on each product page.

Can-Am Defender Winter Cab Bundle

The Can-Am Defender Winter Cab Bundle combines the Can-Am Defender full hard cab enclosure with the Premium Edition Can-Am Defender cab heater with defrost (2016–current). It is built for 2016–2022 Can-Am Defender 2-seat models across HD5 / HD8 / HD10 trims such as Base, DPS, XT, XT Cab, XT-P, PRO, Limited, and Mossy Oak. Pick your exact model and year on the product page so the enclosure and heater options line up.

Separate value on the page is $5,302.50 for the enclosure plus $477.80 for the Premium heater ($5,780.30 total). The bundle price is $5,490.99. The enclosure’s own optional cab-heater upgrade is not offered on this bundle because the heater kit is already included.

Polaris Ranger XP 1000 Winter Cab Bundle

Ranger crews clearing driveways and moving feed through winter will want the Polaris Ranger XP 1000 Winter Cab Bundle. It pairs the Hard Cabs full hard cab enclosure for the 2018+ Polaris Ranger XP 1000 with the Inferno cab heater kit with defrost for 2018–current Polaris Ranger 1000 and 1000 XP machines.

Fitment on the bundle is the 2018+ Ranger XP 1000 2-seat. The heater listing itself covers standard and crew Ranger 1000 / 1000 XP applications from 2018–current, so confirm your cab configuration before ordering. Separate value is $4,567.50 + $428.92 = $4,996.42; the bundle is $4,745.99 (about $250.43 saved).

Polaris General 1000 Winter Cab Bundle

If your General pulls double duty as a trail machine and a winter workhorse, the Polaris General 1000 Winter Cab Bundle is the matching package. You get the Polaris General 1000 hard cab enclosure plus the Inferno cab heater kit with defrost for 2016–current Polaris General models.

The bundle is listed for 2016+ Polaris General 1000 2-seat machines. Enclosure coverage is General 1000 from 2016–present (2 doors). Separate value matches the Ranger-style bundle math at $4,996.42, with a bundle price of $4,745.99.

Honda Pioneer 700 and Yamaha Viking Bundles

Honda owners can grab the Honda Pioneer 700 Winter Cab Bundle: Hard Cabs full hard cab enclosure for the 2014+ Pioneer 700, plus the Inferno heater kit with defrost for 2014–current Pioneer 700 machines. Fitment covers 2014+ Pioneer 700 and 2017–2021 Pioneer 700 Deluxe — pick your model on the page. The heater listing also notes standard and crew Pioneer 700 coverage, so double-check crew vs. standard before you order. Bundle price is $4,745.99 with about $250.43 in listed savings.

Yamaha Viking three-seat owners have the Yamaha Viking Winter Cab Bundle. It includes the hard cab enclosure for the Yamaha Viking (ships with 2 doors, windshield, roof, and rear panel for 2015–present) and the Inferno heater kit with defrost for 2014–current Viking. This bundle is for the 2015+ Viking 3-seat / 2-door — it is not for the 6-seat Viking VI. Bundle price is $4,744.99 with about $250.44 saved versus buying separately.

Fitment and Install Tips Before You Order

  • Match year, doors, and seat count. These bundles are model-specific. A 2-seat Defender bundle is not a Max/crew kit, and the Viking bundle is not a Viking VI kit.
  • Confirm heater vs. enclosure years. Some heaters list a wider year range than the enclosure on the same bundle. When in doubt, call 580-OFFROAD and we will confirm fitment before you order.
  • Plan for freight. The hard enclosure ships by freight. Choose your delivery options on the product page and leave room for both boxes to arrive before install day.
  • Do not stack a second heater upgrade. The enclosure’s own cab-heater upgrade option is left off these bundles because the Inferno (or Premium Defender) heater kit is already included.
  • Install enclosure first, then heater. Seal the cab, then plumb and mount the heater so defrost vents and hose routing land cleanly against the finished panels.

Ready for Freezing Mornings?

A Winter Cab Bundle is the fastest way to go from open roll cage to a sealed, heated cab without hunting down matching parts. Shop the Defender, Ranger XP 1000, General 1000, Pioneer 700, Viking, and other winter cab packages at offroadarmor.com, and get your side-by-side buttoned up before the next cold front.

Posted on

UTV Mirrors for Winter: Side & Rearview Mirror Guide for Defender, Ranger & UForce

Can-Am Defender Premium Smack Back Mirror Set - Offroad Armor

Once the weather turns, most side-by-sides start looking a lot less open. A windshield goes on, then a roof, a cab back, maybe a set of doors. That’s great for staying warm, but every panel you add also changes what you can see around you. Add a plow blade up front, a trailer full of firewood behind you, or a buddy following on an ATV, and suddenly good mirrors aren’t a nice-to-have anymore.

In this guide we’ll walk through why mirrors matter more in fall and winter, the difference between side mirrors and center rearview mirrors, how to make them work with your doors, and a few options we carry for the Can-Am Defender, Polaris Ranger, CFMOTO UForce and other Pro-Fit style machines.

Why Mirrors Matter More in Plow and Hunting Season

Summer riding is usually forward-looking: you’re on a trail, the cab is wide open, and a quick glance over your shoulder tells you everything. Cold-weather riding is different:

  • Enclosed cabs block your view. Doors and a cab back make it harder to look behind you, especially in a heavy coat.
  • Plowing means a lot of backing up. Clearing a driveway or barn lot is a constant back-and-forth. Side mirrors let you see the edges of the drive, fence posts and parked vehicles without twisting in your seat every pass.
  • Towing and hauling. Pulling a small trailer of firewood, feed or a harvested deer is a lot easier when you can actually see the trailer track behind you.

Side Mirrors vs. Center Rearview Mirrors

Most riders end up wanting both, because they do different jobs.

Side mirrors mount on the roll cage or doors and show you what’s beside and behind each side of the machine. They’re the ones you’ll use most when plowing, backing a trailer or pulling into a tight shed.

Center rearview mirrors mount up top, near the windshield or roof, and give you a wide view straight back through the cab. A convex, wide-view design helps cover more of what’s behind you in one glance.

Can-Am Defender: Mirrors With and Without Factory Doors

Defender owners have to think about doors first, because the factory doors can get in the way of standard tube-clamp mirrors.

If your Defender doesn’t use factory doors, take a look at the Can-Am Defender Premium Smack Back Mirror Set. It fits 2017–2023 Can-Am Defender models and is sold as a set. The housings are die-cast alloy rather than plastic, the mirrors are convex, and they lock into three positions. They mount in minutes with the included hardware. One handy detail: if you break one mirror, a replacement can be ordered from the product page’s dropdown, so you don’t have to buy the whole set again. Note that these will not work with factory doors.

If you do run the OEM doors, the Can-Am Defender Mirror Mounts for OEM Doors solve that problem. These SuperATV billet aluminum mount blocks bolt on using the Defender’s OEM mounting points, with no cutting or drilling, and give you a low-profile place to mount side mirrors. They use the M10x1.25 thread pattern found on most Assault Industries mirrors and on SuperATV’s dual-section LED side view mirrors. The kit includes left and right mount blocks plus threadlocker, and the black e-coat finish helps fight corrosion through wet, salty winters.

Pro-Fit Cages: Ranger, General, UForce and More

A lot of machines share Pro-Fit style roll cages, which makes the SCM Side View Mirrors for Pro-Fit Roll Cages one of the most versatile options we carry. Listed fitment includes the 2015+ Polaris Ranger midsize models, 2017+ Ranger XP 1000, 2020+ Ranger 1000, 2016+ Polaris General 1000, 2016+ Can-Am Defender, 2024+ Kawasaki RIDGE, 2018+ CFMOTO UForce 1000 and 2021+ UForce 600 with Pro-Fit cages, John Deere Gator 835–865 models with a Pro-Fit cage, and several others. Check the product page for the full list.

They give you a large 7.5″ x 4.3″ convex viewing area, high-impact construction, multiple adjustment points and a breakaway folding design that helps them survive brush, gate posts and tight barn doors. They’re sold as a driver and passenger pair.

Running full doors? SCM notes that UTVs with full doors will need a hole drilled to mount these mirrors to the door kit, so plan for that if you’ve added hard doors for winter.

Center Mirrors for the Ranger and CFMOTO

For Polaris Ranger owners, the Polaris Ranger Wide-View Convex Rearview Mirror from SCM adds a wide rear view inside the cab. The convex surface gives you a broader viewing angle, and it’s 360° adjustable so you can dial it in for your seating position. Common applications include the Ranger 500, 570, 900, 1000, XP 900, XP 1000 and Crew models with compatible mounting locations, so verify your year, model and mounting setup before ordering.

CFMOTO riders can grab the CF Moto Center Rearview Mirror. It’s a 10″ wide-view design that installs using the factory mount location, adjusts to suit your view, and works with most windshields or roofs. Listed fitment covers the 2019-current UFORCE 1000 and 1000 XL, 2021-current UFORCE 600, 2025-current U10 Pro and U10 Pro XL (including Highland), and several ZFORCE 950 models.

Install and Setup Tips

  • Install your enclosure first. If you’re adding a windshield, roof, cab back or doors this season, put them on before you set up mirrors so you know where everything will clear.
  • Check your door situation. On a Defender, factory doors change which mirrors and mounts you can use. On Pro-Fit machines with full doors, plan for drilling.
  • Adjust from your normal seat position. Set mirrors while sitting the way you actually ride, wearing the coat you’ll plow in.

See More This Winter

Good mirrors are one of the simplest, most affordable upgrades you can make before plow and hunting season, and they make every backing, towing and group-ride situation safer. Find mirrors for your Defender, Ranger, General, UForce and more, along with windshields, cab backs and doors to finish your winter setup, at offroadarmor.com.

Posted on

UTV Power Dump Bed Kits: Electric & Hydraulic Options for Defender, Ranger & General

2026+ Can-Am Defender HD11 Power Dump Bed Lift - view 4

Fall and winter are when a side-by-side really earns its keep. Firewood needs splitting and stacking, gravel needs spreading on washed-out driveways, feed and hay need to get to the barn, and storm cleanup leaves piles of limbs to haul off. Most of that work ends the same way: you pull the bed latch, lift a loaded bed by hand, and hope your back holds up for one more trip. A power dump bed kit turns that whole routine into the push of a switch.

Below, we break down how electric and hydraulic dump bed kits work, what to look for, and the options we carry for the Can-Am Defender, Polaris Ranger XP 1000 and Polaris General XP 1000.

Why Add a Power Dump Bed to Your UTV?

Factory dump beds on most work UTVs tilt on gas struts. The struts help, but you still have to unlatch the bed and lift the load yourself. It’s a different story when the bed is full of wet firewood, gravel or a load of feed, and you’re doing it ten times a day.

A power dump kit replaces the stock strut with an actuator that’s wired to a switch on your dash. Flip the switch and the bed raises; flip it back and the bed comes down. That means fewer trips in and out of the seat, less strain on your back and shoulders, and more control over where the load ends up.

Electric vs. Hydraulic-Over-Electric: What’s the Difference?

There are two main styles of power dump bed kits:

  • Electric actuator kits use a linear electric actuator that mounts where the stock gas strut sits. They’re a straightforward bolt-in upgrade and a great fit for everyday chores.
  • Hydraulic-over-electric kits use an electric pump to drive a hydraulic cylinder. They’re built for heavier lifting and can hold the bed at whatever angle you stop it, which is useful for spreading material as you drive.

Whichever style you choose, always stay within your machine’s rated bed capacity. A stronger actuator doesn’t change what your UTV’s frame and suspension are designed to carry.

Can-Am Defender Power Dump Bed Options

Defender owners have the most choices, depending on the model year and how heavy your loads get.

Can-Am Defender Electric Dump Bed Kit – This SuperATV kit replaces the OEM gas struts with an electronic actuator rated for up to 880 pounds. It has a 29 3/4″ extended length with an 11″ stroke, plug-and-play wiring, and a dash-mounted rocker switch. It fits a long list of Defender HD5, HD7, HD8, HD9 and HD10 models, including many MAX, XT, DPS and Pro versions. It is not compatible with the Defender Limited HD10 or MAX Limited HD10, so check the fitment list on the product page before you order.

Can-Am Defender Power Hydraulic Dump Bed – If you haul heavy material, this hydraulic-over-electric kit is capable of lifting over 1,500 pounds within seconds. It’s a commercial-grade, water-resistant unit, and the bed holds in any position you select with the backlit rocker dash switch, so you can spread mulch or gravel as you go. It fits 2016–2025 Defender regular and crew cab models (HD5, HD7, HD8, HD9 and HD10), but it does not fit units with an HVAC system. The kit includes wiring, mounting hardware and the switch, and it comes with a 1-year warranty.

2026+ Can-Am Defender HD11 Power Dump Bed Lift – Running the new HD11? This version brings the same hydraulic-over-electric design to 2026+ Defender HD11 models, regular or crew cab, with or without HVAC. It’s also capable of lifting over 1,500 pounds, holds the bed at any position, and comes as a complete kit with a 1-year warranty.

Polaris Ranger XP 1000 and General XP 1000 Kits

Polaris Ranger XP 1000 Electric Dump Bed Kit – SuperATV’s Ranger kit replaces the stock gas struts with an electronic actuator that mounts right where the struts were. At 16″ fully extended, it’s designed to dump the bed completely every time, making short work of hay bales, soil and logs. It fits 2018+ Ranger XP 1000 and 2019+ Ranger XP 1000 Crew models, including NorthStar, High Lifter, Trail Boss, Big Game and Waterfowl editions.

Polaris General XP 1000 Electric Dump Bed Kit – The General’s bed is smaller, but it still gets plenty of work. This kit converts the bed from manual to electric with an actuator that can dump loads up to 600 pounds at the flip of a switch. It mounts in the stock strut location, extends up to 16 inches to fully dump the bed, and fits the 2020+ General XP 1000 and General XP 4 1000.

Keep the Bed Down on Rough Trails

If you run a full-size Polaris Ranger with the factory bed, a surprise dump on a rough trail is a real headache. The Ricochet Off-Road Dump Bed Lock Kit uses heavy-gauge steel brackets with a zinc/galvanized finish and a locking pin, so the bed can’t lift until you pull the pin yourself. It bolts on with factory mounting points and no drilling, and it fits Ranger 570 full-size, Crew 570, Ranger 1000 and Ranger XP 1000 models, including Crew, High Lifter and Trail Boss/NorthStar editions. Ricochet Off-Road parts are made to order, so plan on a 1–2 week lead time.

Install and Buying Tips

  • Confirm your exact model and year. Dump bed kits are model-specific, and some trims (like the Defender Limited or HVAC-equipped Defenders) need a different kit.
  • Know your load. Firewood, wet sand and gravel get heavy fast. Pick a kit that matches the work you do, and never exceed your machine’s bed capacity.
  • Plan your switch location. Kits with a dash-mounted rocker switch keep the controls within easy reach from the driver’s seat.
  • Clear the bed area. Before raising a loaded bed, make sure nothing is behind the machine and the bed has room to tilt.

Make Winter Chores Easier

A power dump bed is one of those upgrades you’ll wonder how you ever lived without, especially once the firewood, gravel and feed runs start piling up. Find the right kit for your Defender, Ranger or General, and browse the rest of our bed accessories, at offroadarmor.com.

Posted on

UTV Front Bumpers & Brush Guards for Winter Work: Defender, Pioneer, Ranger, UForce & Grizzly

Defender Front Bumper and Brush Guard - Offroad Armor

Winter work is hard on the front of a side-by-side. You’re pushing a plow blade, nosing through brush to reach a fence line, dragging a downed tree out of the lane, or creeping through timber after dark to check a stand. Every one of those jobs puts your grille, headlights, front plastics and radiator closest to the trouble. A front bumper or brush guard is the piece that takes the hit first, and for a lot of owners it’s also where the winch and extra lights end up living.

If you’re getting your machine ready for plow season and cold-weather chores, here’s what to look for in a front bumper or brush guard, plus five options we carry for the Can-Am Defender, Honda Pioneer 1000, Polaris Ranger, CFMoto UForce U10 Pro and Yamaha Grizzly 700.

Bumper vs. Brush Guard: What’s the Difference?

The terms get used interchangeably, but there’s a practical difference. A front bumper usually replaces the stock bumper and adds a stronger structure across the nose of the machine, often with tow hooks, a skid plate or a built-in winch mount. A brush guard adds tubing or a panel in front of the grille and lights to deflect brush and debris. Many products do both.

Before you buy, think about three questions:

  • Do you run (or plan to run) a winch? If so, make sure the bumper keeps the winch in the factory location or has its own winch mount.
  • Do you want extra lighting? Some bumpers include LED pods, some have tabs or a spot for a light bar, and some leave lighting to you.
  • How hard is the install? Winter is no time for cutting and drilling, so look for included hardware and a simple install.

Can-Am Defender: Front Bumper and Brush Guard

The Defender Front Bumper and Brush Guard fits 2017-2026 Can-Am Defender models and bolts to the stock machine in less than 45 minutes with no drilling or cutting. It has a 1-1/2″ diameter stinger tube, welds ground smooth and a textured powder coat for protection against the weather.

Two details make it a strong pick for winter work. First, it still lets you mount a winch in the stock location, so your plow or recovery winch stays where it belongs. Second, you can mount an LED light bar on the inside, or use the included cover plate if you don’t want one. If you want the back of your Defender covered too, there’s also a front and rear bumper combo.

Honda Pioneer 1000: Front Bumper/Brushguard with Winch Mount

For Pioneer owners, the Pioneer 1000 Front Bumper/Brushguard with Winch Mount (EMP P/N 13147) replaces the stock bumper and is built from 1/8″, 3/16″ and 1/4″ thick American steel. It’s made in Cleveland, Ohio, and installs in less than an hour with the included hardware, with no drilling or cutting.

The integrated winch mount is the big feature here. It accepts regular or wide spool UTV winches up to 4,000 lbs, with bolt patterns of 3″ deep by 4-7/8″ wide and 3″ deep by 6-5/8″ wide. This version also includes two flush-mount LED lights. The product page lists fitment for the Pioneer 1000 and 1000-5, so check your exact model and year on the listing before you order.

Polaris Ranger: Front Bumper with Lights (GEN 2)

The Polaris Ranger Front Bumper with Lights is a GEN 2 design made in the USA from 12-gauge American steel with 1/4″ mounting brackets and tow hooks. It’s a bull bar design that protects the grille, plastics and front frame section, and it comes with a bolt-on skid plate that shields the lower frame, front differential and radiator.

It also includes two 3″ flush-mount LED light pods with a wiring harness and dash switch, which is a real plus on short winter days. It’s winch-friendly, using the factory winch location and winch plate (the winch plate isn’t included). It mounts to the factory Ranger mounting points with basic hand tools and fits full-size 2015-2026 Ranger models, including the XP 1000 trims, Ranger 1000, and Crew models. The full fitment list is on the product page.

CFMoto UForce U10 Pro: Trailbreaker Front Bumper

The CF Moto U10 Pro / U10 Pro XL Trailbreaker Front Bumper from Sport Concept Manufacturing is built from 1.75″ heavy-duty steel tubing with a powder-coated finish that resists corrosion and scratches. It’s made to protect the front of your UForce from brush, branches and trail debris.

It has welded mounting tabs for LED pod lights (the pods are sold separately), and it comes with the hardware and clear installation instructions. It fits the CF Moto U10 Pro and U10 Pro XL.

Yamaha Grizzly 700 ATV: Ricochet Off-Road Front Brush Guard

Quad riders need front protection too, especially in tight timber. The Ricochet Off-Road Front Brush Guard for the Yamaha Grizzly 700 is made from 1/4″ UHMW plastic, so it shields your front bash plate from rocks and debris without adding much weight. It’s rustproof, bolts on with the included hardware, fits 2016-2026 Grizzly 700 models and is made in the USA.

One important note: this guard isn’t recommended if you plan to run a winch, because it covers the area needed for a winch install. If your Grizzly is a plow or winch machine, look at other options. Ricochet Off-Road parts are made to order, so plan on a 1-2 week lead time.

Gear Up Before the Snow Flies

A solid front bumper or brush guard protects the parts that are most expensive to replace and gives your winch and lights a strong home for winter work. Whether you ride a Defender, Pioneer, Ranger, UForce or Grizzly, there’s a bolt-on option that fits how you use your machine.

Ready to protect your front end? Shop front bumpers, brush guards and more winter UTV and ATV accessories at offroadarmor.com, and pair them with a winch setup for plow season so you’re ready when the first snow hits.

Posted on

UTV & ATV Skid Plates for Fall and Winter: Protect Your Machine From Hidden Rocks, Stumps & Ice

F76122138

Fall and winter riding hides a lot of trouble. Fallen leaves cover rocks, stumps and logs. Early snow fills in ruts and drifts over the stuff you’d normally steer around. Frozen mud turns into ridges as hard as concrete. And if you’re hauling a deer out of the timber or plowing a driveway, your machine is carrying more weight and sitting lower than it does on a summer trail ride. All of that puts the underside of your UTV or ATV right in the line of fire.

Most side-by-sides and quads leave the factory with thin plastic skid plates. They’re fine for light use, but they crack, flex and tear when you land on a hidden rock with a loaded bed. An aluminum skid plate is one of the most practical upgrades you can make before the cold-weather season gets going. Here’s what to look for, plus a few options we carry for the Polaris Ranger, Honda Pioneer, Can-Am Commander and Kawasaki Brute Force.

Why Skid Plates Matter More in Fall and Winter

Your frame, belly pan, CV boots, A-arms and lower engine components are all exposed. When visibility of the ground drops, so does your ability to pick a clean line. A good skid plate does two jobs: it takes the hit so your drivetrain doesn’t, and it lets the machine slide over an obstacle instead of hanging up on it. That second part matters when you’re alone on a cold evening and don’t want to be winching yourself off a stump.

A full belly skid also helps keep mud, snow and packed ice from building up inside the frame, where it can freeze overnight and make for a rough start the next morning.

What to Look For in a UTV Skid Plate

  • Material and thickness. The plates below are cut from 3/16″ (.188″) thick aluminum, most of them 5052 aircraft grade. Aluminum resists corrosion from wet, salty winter conditions and doesn’t add the weight of steel.
  • Fit. Look for plates designed as direct replacements for your factory plastic skids, so they line up with stock mounting points.
  • Smooth underside. Recessed hardware lets the plate glide over rocks and logs rather than catching on bolt heads.
  • Exact fitment. Ranger models in particular come in full-size, mid-size and crew versions that don’t share parts, so always double-check the year and model on the product page.

Polaris Full-Size Ranger: Ranger Belly Skid Plate

The Ranger Belly Skid Plate fits 2009-10 Ranger 500, 2010-14 Ranger XP800 and the Ranger XP800 6×6. It’s 3/16″ thick 5052 aircraft grade aluminum, replaces the stock skid plate and mounts with your stock hardware. It’s made in the USA. Note that it won’t fit the 2011 Ranger 500 small-body style or the Ranger Crew, so check your model before ordering.

Polaris Mid-Size Ranger: Full Belly Skid Plate

If you run a smaller Ranger, the Mid-Size Ranger Full Belly Skid Plate covers a long list of models: 2010-14 Mid-Size Ranger 400, 2011-22 Mid-Size Ranger 500, 2013-14 Mid-Size Ranger 800, 2019-20 2-seat/Mid-Size 500 and 2014-2021 2-seat/Mid-Size Ranger 570. It’s .188″ (3/16″) thick 5052 aircraft grade aluminum and replaces the stock plastic skid plate (Polaris #5813381, 5450136 and 5458007-070). It’s made in Cleveland, Ohio. This one does not fit full-size Rangers.

Honda Pioneer 500: Aluminum Belly Skid Plate Set

Pioneer 500 owners know the factory two-piece plastic skids don’t take much abuse. The Honda Pioneer 500 Belly Skid Plates are a set of two 3/16″ thick aluminum plates designed as near-direct replacements for the original plastic pieces, for 2015-24 Honda Pioneer 500 models. They install with your stock hardware or the new mounting hardware that’s included, and they’re fabricated in Cleveland, Ohio. For a work machine that sees farm lanes, woods trails and winter chores, it’s a worthwhile swap.

Can-Am Commander: Front Skid Plate

The front of the machine takes the first hit when you climb over a log or drop off a bank. The Commander Front Skid Plate fits 2010-19 Can-Am Commander models. It’s fabricated from .188″ thick 5052 aircraft grade aluminum, and the screw heads are recessed on the underside so you slide over objects without hanging up. Mounting hardware is included, and it installs in minutes. It’s made in Cleveland, Ohio.

Kawasaki Brute Force 750 ATV: Ricochet Full Frame Skid Plate Set

Quad riders need protection too, especially on a hunting ATV that spends the season crawling through creek bottoms. The Ricochet Off-Road Full Frame Skid Plate Set for the Kawasaki Brute Force 750 is offered for all 2005-2026 Brute Force 750 models. The kit includes the full frame skid plate set with a bash plate and all mounting hardware, and it’s built from 5052-H32 aluminum in the USA. A black powder coat option is available. Ricochet Off-Road parts are made to order, so plan on a 1-2 week lead time (the powder coat option can add up to another 1-2 weeks).

Install Tips Before the Snow Flies

  • Clean the frame first. Pressure-wash the underside and let it dry so you can see the mounting points and spot any damage hiding under dried mud.
  • Inspect while it’s off. With the factory plastic removed, check CV boots, brake lines and frame welds. It’s the easiest look you’ll get all year.
  • Get it on a level surface. A floor jack and stands make it much easier to hold a full belly plate in place while you start the bolts.
  • Recheck after a few rides. Hardware can settle, so give everything a quick check after your first few outings.

Gear Up for Cold-Weather Riding

A skid plate is one of those upgrades you forget about until the day it saves you from a cracked frame or a torn boot miles from the truck. If your machine is still wearing factory plastic underneath, now’s the time to fix it. Browse skid plates and the rest of our cold-weather gear at offroadarmor.com, and if you’re not sure which plate fits your machine, reach out and we’ll help you find the right one.

Posted on

UTV Seat Covers for Fall & Winter: Protect Your Seats From Mud, Wet Gear & Weather

Seat Cover - Offroad Armor

Fall is when a side-by-side earns its keep. You’re climbing in with muddy boots, wet hunting jackets and a dog that just went through the creek, then hauling firewood or checking fence in the rain. All of that ends up on your seats. Factory UTV seats aren’t cheap to replace, and once the vinyl cracks or the foam soaks up water, they only get worse through winter. A good seat cover is one of the easiest, lowest-cost ways to protect them.

Here’s what to look for in a UTV seat cover, plus a few covers we carry for the Polaris Ranger, Kawasaki Mule, Can-Am Defender Max, Honda Pioneer 1000-6 and Yamaha Wolverine X4.

Why Seat Covers Matter Most in Fall and Winter

Summer is mostly dust and sun. Fall and winter bring the messy stuff: mud, rain, snow melt, and gear that’s been sitting in a wet field all morning. Water that gets into a torn seat stays in the foam, which means a cold, soggy seat on the next ride and mildew down the road. Covering your seats now keeps the factory upholstery clean and dry, and if your seats already have some wear, a cover makes them look and feel a lot better without the cost of new seats.

What to Look For in a UTV Seat Cover

  • Fabric that handles abuse. Look for heavy-duty, coated materials. Thin covers rip the first time you slide across them with a tool belt or a rifle case.
  • Water resistance. A water-resistant backing or coating keeps moisture from soaking through to the seat underneath.
  • A secure attachment. Elastic edges and straps that lock the cover in place keep it from bunching up or sliding when the trail gets rough.
  • The right fit for your machine. Bench seats and bucket-style seats are different shapes, and crew models have a second row. Pick a cover built for your make, model and seat style.

Polaris Ranger: Classic Accessories Bench Seat Cover

For Ranger owners with a bench seat, the Classic Accessories Bench Seat Cover (New Vista) for the Polaris Ranger is a simple way to protect new seats from dirt, mud, heat and weather damage, or to renew the look of older ones. It’s made of Classic Accessories’ heavy-duty ProtekX6 fabric with a water-resistant backing and an exterior coating for weather and abrasion protection. If your Ranger is a daily work machine on the farm or the lease, this is a budget-friendly place to start.

Kawasaki Mule: Classic Accessories Black Bench Seat Cover

Mule owners get the same ProtekX6 construction in black with the Classic Accessories Black Bench Seat Cover for Kawasaki Mule utility vehicles (part number 18-033-010401-0). It’s designed for Mule models with bench-style seating and helps protect the seat from dirt, mud, heat, moisture and worksite debris. The listing notes that exact Mule model and year coverage wasn’t provided, so check your seat style and confirm fitment before you order. If you’re not sure, reach out to us with your year and model.

Moose Offroad Seat Covers for Defender, Pioneer and Wolverine

If you want a heavier-duty, model-specific cover, the black Moose seat covers are worth a look. They’re made in the USA from 600 denier urethane-coated polyester with a durable water-resistant coating on the backside and UV resistance. Elastic around the outer edge tucks under the seat bottom and seat back, and neoprene side panels plus heavy Velcro straps on the back and sides lock the cover in place so it stays put no matter how rough the trail gets. Installation takes no tools, everything you need to mount it comes in the box, and each cover is for either the front or the rear row of seats.

These are a great fit for crew machines that haul the whole hunting party or the work crew, since the back row tends to collect the most mud and the least attention. Because each cover is for one row, crew owners who want both rows protected should plan on two.

Install and Care Tips

  • Start with clean, dry seats. Trapping dirt or moisture under a cover defeats the purpose. Wipe the seats down and let them dry before you install.
  • Snug it up, then ride and re-check. Covers settle after the first ride or two. Re-tighten straps and re-tuck the elastic edges so the cover sits tight.
  • Clean it like gear, not upholstery. Knock off dried mud and rinse the cover rather than letting grime grind into the fabric all season.
  • Pair it with a storage cover. If your machine sits outside over winter, a full UTV storage cover keeps snow and sun off the seats, roof and dash between rides.

Which Cover Is Right for You?

If you run a Ranger or Mule with a bench seat and want solid everyday protection at a lower price, the Classic Accessories bench covers are an easy choice. If you own a Defender LTD Max or XT-P, Pioneer 1000-6 or Wolverine X4 and want a USA-made, model-specific cover with neoprene sides and Velcro straps that stay locked down on rough trails, go with the Moose covers. Either way, you’re protecting one of the parts of your machine that takes the most abuse in fall and winter.

Shop UTV Seat Covers at Offroad Armor

Muddy boots and wet gear are part of the season, but ruined seats don’t have to be. Browse seat covers, storage covers and cold-weather upgrades for your side-by-side at offroadarmor.com, and if you have a fitment question, our team is happy to help you find the right cover for your machine.